GB: Wedge for ender 3 Max Neo filament sensor for RedRex Extruder / FR: Cale pour capteur de fin de filament d'ender 3 Max Neo pour extrudeur RedRex
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
♥ Like, share and post your fabrication ♥ Aime, partage et poste ta fabrication ♥
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 112
- Wydruki
- 1
- Wyświetlenia
- 1432
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
🇬🇧 :
When I changed my original "crappy" extruder for a RedRex much more adapted to a proper printer (I'm not saying it's a good printer BUT! That it is "less worse" this way).
So I needed to upgrade the filament sensor to be up to par. There was a model available on Cults with 44 000 errors... (Yeah, on a 4x4x1cm plate...) So here is a gift ;)
Link to RedRex on amazon: https://www.amazon.fr/dp/B09ZDQM6P6?ref=ppx_yo2ov_dt_b_product_details&th=1
- You will need a bigger screw than the original one because it is too short. I use M3x30 but it's a bit too long
- Without supports, flat... Yes, I specify... You never know!
- No need for a raft
- Can be printed in PLA
- Filling as you want !
- Prints in 20 minutes not even...
- Need a tuto to install it ? Look at the picture.
🇫🇷 :
Lorsque j'ai changé mon extrudeur “à chier” d'origine par un RedRex bien plus adapté à une imprimante digne de ce nom. (Je ne dis pas que c'est une bonne imprimante MAIS ! Qu'elle est "moins pire" comme cela).
J'ai donc eut besoin de rehausser le capteur de filament pour être à la hauteur. Il y avait un modèle disponible sur Cults avec 44 000 erreurs… (Ouais quand même sur une plaquette de 4x4x1cm…) Donc voila cadeau ;)
Lien du RedRex sur amazon: https://www.amazon.fr/dp/B09ZDQM6P6?ref=ppx_yo2ov_dt_b_product_details&th=1
- Vous aurez besoin de vis plus grande que celle d'origine car trop courte. J'utilise des M3x30 mais c'est un peu trop long.
- Sans supports, à plat… Oui, je précise… On ne sait jamais !
- Pas besoin de raft
- S'imprime en PLA
- Remplissage comme tu veux !
- S'imprime en 20 minutes même pas…
- Besoin d'un tuto pour l'installer ? Regarde la photo.