Rock Cave for Reptiles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a bottomless hide for reptiles, like a snake. Made from an original photogrammetry rock model.
- Ocena
- 3 / 5
- Polubienia
- 93
- Pobrania
- 552
- Wydruki
- 1
- Wyświetlenia
- 1918
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution
This is a bottomless hide for reptiles, like a snake.
Made from an original photogrammetry rock model.
You can scale it a bit in any dimension if you need to tweak it a bit. The pictured version was scaled to be taller than normal.
Print Settings
Printer Brand:
Creality
Printer:
CR-6 SE
Rafts:
No
Supports:
No
Resolution:
.28mm
Infill:
25%
Filament: Sunlu PLA Rainbow
Notes:
I recommend printing without supports if your printer can at least print without making spaghetti. The inside will be ugly, but hit it with a propane torch or heat gun to smooth it out. The critter won't care!
If you can't print without supports, use the minimum possible.
Category: Pets