Caliper depth measuring foot for Shahe digital caliper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Caliper depth measuring foot for Shahe digital caliper, the caliper body dimensions are 16mm * 3.5mm
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 130
- Wydruki
- 1
- Wyświetlenia
- 629
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
Caliper depth measuring foot to fit a Shahe digital caliper with body dimensions 16mm * 3.5mm
I added a headless M3 screw to secure the caliper in place but a standard M3 screw can be used too (although the fit of the caliper is already secure enough even without the screw).
I have used 0.2mm layer height using PLA+
I wanted the bottom side to be flat so I've selected the up side down orientation using supports
Update: added a cropped version (6mm high) for fast print in order to test the fit and even experiment with X/Y resize to improve the fit. Once it works you can apply the same settings and print the full version