Handle cover for Heritage The Rock cookware handles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Handle covers for The Rock cookware handles by Heritage
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 23
- Wydruki
- 1
- Wyświetlenia
- 164
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
We have some pot lids which have metal handles and get too hot for comfort, so I designed some covers to be installed over top of them (using a bit of glue on the edges & tabs).
The handles fit the large & medium sized lids (I haven't bothered to create one for the small lid).
I'm doing a test with PLA, and I think they should be Ok since they're essentially formed around the handle and not under any load or tension.
For now, I advise that you print them using ABS or PETG; in order to withstand the higher temperatures they'll run into.
Update 2023-04-11: PLA printed handle covers worked just fine in my test, with a pot of boiling water for 10 minutes. An infrared thermometer showed they hit a peak of around 77 to 80 degrees Celcius but the handles were Ok. I'll update this note, after we've put them through more extensive real-world usage.