Caliper depth measuring foot for unbranded vernier caliper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Caliper depth measuring foot for vernier caliper with body dimensions 16mm * 3.5mm and small plates on both sides
- Ocena
- 4,667 / 5
- Polubienia
- 43
- Pobrania
- 160
- Wydruki
- 4
- Wyświetlenia
- 808
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
Caliper depth measuring foot to fit an unbranded vernier caliper with body dimensions 16mm * 3.5mm having small plates on both sides
I added a headless M3 screw to secure the caliper in place but a standard M3 screw can be used too (although the fit of the caliper is already secure enough even without the screw).
I have used 0.2mm layer height using PLA+
I wanted the bottom side to be flat so I've selected the up side down orientation using supports
Update: added a cropped version (6mm high) for fast print in order to test the fit and even experiment with X/Y resize to improve the fit. Once it works you can apply the same settings and print the full version