Contact point extender for Dogtra Edge RT dog training collars
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Correct extension length to make the contact points fit on the collar posts
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 278
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I recently switched from a Garmin training collar set to the Dogtra Edge RT for my retriever training. When I tried to install the included contact point extenders, to my surprise I couldn't get the contact points to grab on to the threads on the posts at all. I tried three sets of extenders, none of which worked. Finally, I measured the extenders and noticed that the extender base is 3.61 mm thick instead of the expected 3.175 (1/8 inch)—there's just not enough thread for the contact points to hold on to.
So I modeled the extenders but with an 1/8'' thickness of the extender base. The contact points now screw in properly. Well, all but one ☹, which speaks for shoddy quality control by Dogtra.
License Exclusion: This model is excluded from the Commercial License available through the Commercial License tier of the Printables Club.
If you like what I'm doing…
… consider buying me a coffee or joining my Club.