Adalit L-30 wall mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Store spares of your Adalit L-30 helment torches with this wall mount
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 29
- Wydruki
- 1
- Wyświetlenia
- 324
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Idea
We are using Adalit L-30 helmet torches in the fire department. Since these are in a pool and everyone can take one or change it for a charged one, we have a table with chargers on it and several spare torches on it. The problem now was to identify the charged ones from those that still need to be charged. Also I did not like the way the torches were just laying around.
Print instructions
Since the torches are not the lightest and handling is not done with the greatest care, I recommend a sturdier setting to print the mounts. Ours are used inside so PLA will do just fine.
| Material | PLA | |
| Layer hight | 0,2mm | |
| Nozzle | 0,4mm | 0,6mm |
| Perimeters | 5 | 4 |
| Infill | 20% | 15% |
| Specials | - | - |
Files and mounting instructions
The little wall mount can be screwed onto wherever you like using M3 screws with angled head. We used regular SPAX wood screws.
👍LIKE👍 + 💬SHARE💬 + ⚒post your MAKE🛠
Please leave a like and share your experience with this design. Let me know if I can improve on it and redesign it. There is always a better version. Also show us your make!
Also see my other designs here.
Highest version number is the most recent.
| V1 | dd.mm.202x | Upload first public version |