Sony lens holder for e-mount lenses
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to store my e-mount lenses in a way that was a little more secure, so a lens doesn't get knocked over as easily
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 81
- Wydruki
- 1
- Wyświetlenia
- 718
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Plate to store 4 sony e-mount lenses. They're spaced wide enough apart that you can easily fit most lenses.
Pictured here is a Tamron 70-300 that is 92 mm wide. You could place 4 of them on this mount without clearance issues. If your lens is wider than 95mm, you might still be able to fit, but not two of them next to each other.
Print without any supports.
I used 25% infill, but it also worked fine with 20% infill. If you go lower, it might make the base flex more than you want. 4 lenses can be heavy.