Filament Spool Rack for Wire Shelving
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These pieces, when used in conjunction with some 1" Schedule 40 PVC piping, allow you to hang your spools of filament…
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 83
- Wydruki
- 2
- Wyświetlenia
- 1508
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
These pieces, when used in conjunction with some 1" Schedule 40 PVC piping, allow you to hang your spools of filament beneath wire shelving commonly used in closets.
This remix includes these changes:
• A hanger with support for a 10mm thick wire as well as the 5mm that was originally supported
• The hangers are suited for 1" OD PVC pipe
In the example pictures, the 2' long PVC pipe has been wrapped with 2.83" wide painters tape for style. I tucked in the ends of the tape into the ends of the pipe. I noticed that the connector pieces seem to squeeze out a bit of the glue of the tape that's been wrapped inside as those parts of the connectors were a little sticky after removal. That's probably good for a bit of extra hold, although the pressure fitting seems to work well enough by itself.
This was remixed from acelerson's "Spool storage" design (https://www.thingiverse.com/thing:1000433).
Print instructions
Perimeters: 3
Infill: 25% for hangers, 10-15% for connector