Mini RS232 to TTL Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Enclosure for Mini RS232 to TTL board (Hailege)
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 492
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a slim enclosure for “Hailege Mini RS232 to TTL MAX3232 to TTL Level Converter Board”. Idea is on TTL side all 4 cables are connected, other side a 2 pin 2.54mm header soldered in place.
print instructions
- print base as you like
- cover must be printed in standing orientation to be ridgid enough
additional notes
I'm interested in your feedback to improve my stuff! So give me likes, post makes, comment and rate the print to show others and me how well it goes.
If you post a make, let me know which filament you use.
If you want to support me by donating a coffee go to https://ko-fi.com/antimaterie I would really happy about it. The money will be invested in all stuff regarding 3d printing to give more and better quality models.
In general my Prints are not for commercial use, but if you are a print farm owner and want to sell some of my stuff, please contact me.
Hope you enjoy my models.