Guy with Books Bookend
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bookended that has been 3d scanned and processed for the Bookends contest
- Ocena
- 0 / 5
- Polubienia
- 38
- Pobrania
- 85
- Wydruki
- 0
- Wyświetlenia
- 694
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
A guy with books bookended, this started as a scan of a real bookend which has been edited for easier 3d printing and use.
You might be able to get away with printing this without supports if you have a nice printer but I recommend manually placing a few between his legs and under his arms.
Print with high infill or print hollow and add weights mid print for stability (the original from the scan is metal and weighs a lot)
Pictured: Bookend right (gold print) and Bookend left low poly (blue print) both printed at 80% scale (original design in mm)
Scan is the Stl from the 3d scan and is not for printing.