1 / 2
Dust Cover for the ESC OpenPPG SP140 Electric Paramotor — zdjęcie 1
1 / 2

Dust Cover for the ESC OpenPPG SP140 Electric Paramotor

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple pressure fit cover for the gaping hole in the ESC where the throttle plugs in to keep dust out and plugs solid.

Ocena
0 / 5
Polubienia
1
Pobrania
44
Wydruki
0
Wyświetlenia
317
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

The gaping hole in the side of the ESC freaked me out while carrying SP140 on the back of the car down dusty roads, so I created this dust cover. It also stabilizes the flimsy throttle plugs. It's press fit between the mounting bolts of the ESC. It's been solid through multiple flights, and the plugs would have to come out of their sockets for it to come off of the ESC, so it's safe as far as I can see. Easily removable as well. A video of how to install as well as further discussion can be found here: https://community.openppg.com/t/dust-cover-for-esc-and-throttle-plug-support

Printed in PETG at .2mm layer height, 10% Gyroid infill with no supports. 

Tagi