Gabb\Gizmo Watch Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I was unable to find a single Gabbwatch stand stl out on the web, so I created my own. It snuggly fits the Gabbwatch…
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 103
- Wydruki
- 0
- Wyświetlenia
- 703
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
I was unable to find a single Gabbwatch stand stl out on the web, so I created my own. It snuggly fits the Gabbwatch charging block and then you wrap the charging cable around the base and feed it through the groove on the bottom before plugging in the USB.
This model will also work with the Gizmowatch which uses the same charging block, but the cable comes off a different side. The picture shows the original model, made for the Gabbwatch. I've since included additional slots to accommodate the Gizmowatch charger.
Print Settings
Rafts:
No
Supports:
No
Resolution:
.2mm
Infill:
15
Category: Organization