Bambulab X1 Feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printer is too close to the floor
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 151
- Wydruki
- 1
- Wyświetlenia
- 1646
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Feet for the Bambulab X1.
I printed them from PLA and glued felt gliders on the bottom. The feet work great because now you can lift or move the printer easier without any problems.
Why? In my case, the printer is very close to the wall and in case of a malfunction, I need to be able to move the printer. The gap between the printer and the cabinet is originally too small to be able to reach under the printer with my fingers.
Now i print the feet with TPU (Shore 85A) (see my settings in Bambu Studio - if you print faster, your hotend will probably clog).
Print Settings
Printer: Bambulab X1 Carbon
Supports: No
Resolution: 0,2mm
Infill: 25
Filament brand: Sunlu / extrudr
Filament color: Silver / black
Filament material: PLA+ / TPU