Mini ITX tray for Turing Pi 2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tray for Turing Pi 2 that covers the board's back while not mounted in a case
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 136
- Wydruki
- 1
- Wyświetlenia
- 1414
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
Turing Pi 2 Tray
This tray has been designed specifically for Turing Pi 2 but might match more Mini ITX boards. Its task is to raise the bottom of the board above the desk and let it lay securely. The space below is sufficient to mount M.2 drives with no heatsink. The tray is designed for M3 3.0-5.0 mm flat head screws.
This tray will be further expanded to a complete bench for 2x 2.5" disks and cable management.
Print parameters
It's designed to be printed with a 0.4 mm nozzle. For faster prints and strength set wall thickness to 2.0 (or 5 walls) and top/bottom thickness to 1.2 ( layers). Cura estimates 2 grams (8.69m) of filament.
---------
While this is never necessary, if you like my work and feel super generous, you can consider buying me a coffee to keep me going :)