Small table - Support PC screen / Sellette
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small Support Table used as PC screen stand Width 240mm High 172mm Depth 195mm Almost the full bed surface Print time…
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 255
- Wydruki
- 0
- Wyświetlenia
- 1002
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Small Support Table used as PC screen stand
Width 240mm High 172mm Depth 195mm
Almost the full bed surface
Print time : around 20 hours
Print instructions
Category: Household Summary
Small Support Table used as PC screen stand
Width 240mm High 172mm Depth 195mm
Almost the full bed surface
Print time : around 20 hours
Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: No
Resolution: 0.2
Infill: 35%
Filament: Prusament PLA Black
Notes:
To avoid warping and heath bed peels off, the following has been applied:
a glue spray (dimafix)
It was very effective for me. It also makes the surface rather shiny as if it was molded, but any existing makes or too much glue applied on the bed surface will be reported into the print !
Bed temp: 1rt layer 70 and after 65 degrees