1 / 14
Puerto Rico Organizer remix
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made a few tweaks to Fabmaszter's excellent Puerto Rico Organizer. I added fillets to the bottoms of the compartments.
- Ocena
- 4,75 / 5
- Polubienia
- 38
- Pobrania
- 178
- Wydruki
- 5
- Wyświetlenia
- 1760
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (18)Wydruki i komentarze (Wydruki: 5) (Komentarze: 5)Remiksy (0)Kolekcje (74)Powiązane
I made a few tweaks to Fabmaszter's excellent Puerto Rico Organizer.
- I added fillets to the bottoms of the compartments. Pulling components out of the compartments was sometimes difficult. Fillets make it easier.
- I added a thicker lip around the edges of the 4- and 5-player compartment lids. They tended to slip out of place easily.
- On the back side of the compartment lids, I embossed the correct number of pieces to put back in each compartment at the end of a game.
The PR_BigBox.stl and PR_Tokens.stl files are unmodified from the originals. I include them just for one-stop shopping.
Also pictured:
Print instructions
Might be worthwhile to wet-sand the fillets a bit. There's still a bit of resistance when trying to get a part started up the layer-height staircase.