Parametric Remote Control Holder (with Fusion360-File)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
closed remote control holder any remote. For hidden use under the table. With split version for small printers.
- Ocena
- 5 / 5
- Polubienia
- 57
- Pobrania
- 340
- Wydruki
- 0
- Wyświetlenia
- 1656
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted an easy-slide-in and easy-slide-out storage solution for my remote controls. So I decided to hang them under the table with some Tape (like Tesa Powerstrips or something like that). Therefor I indented the top. You can easily slide it out with your middle finger and through the slight step at the beginning it won't wiggle itself out.
I also uploaded the Fusion file, which has some parameters included such as the Dimensions of the remote control, so you can make it fit to yours.
The first half of the timeline is the holder itself, the second half splits it in the middle and generates overlapping tabs.
I recommend printing upright.
The .3mf files have a wallthickness of 1.2mm so they should be printable with 0.4 and 0.6 nozzle. I did mine with 0.6.
At first I thought this looks a bit flimsy but I printed them roughly half a year ago and they survived my kids since then, so I'm happy.