1 / 10
Prusa MINI extruder placeholder with filament sensor (for Direct Drive conversions) — zdjęcie 1
1 / 10

Prusa MINI extruder placeholder with filament sensor (for Direct Drive conversions)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Extruder placeholder with IFS(Integrated Filament Sensor) for MINI direct drive printhead conversion.

Ocena
0 / 5
Polubienia
14
Pobrania
48
Wydruki
0
Wyświetlenia
836
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

Prusa MINI extruder placeholder with IFS(Integrated Filament Sensor) for MINI direct drive printhead conversion. This model based on CM3D Extrusor MINI + FS  model with straight filament path. There are different versions of the placeholder:

  •  for stock MINI M8x1.25 PTFE tube fitting
  •  for PC4-M6
  •  for PC4-M10

Filament sensor module and lever the same as in Vertex IFS extruder 

3-point rear z carriage based on Vertex design. Just made a plane surface on the backside.

Fasteners:

  • M2x8 BHCS - 1 pcs
  • M3x10 BHCS - 2 pcs
  • M3x12 BHCS - 1 pcs
  • M3x35 BHCS - 2 pcs
  • 10x6x2 magnet - 2 pcs
  • 7mm steel ball - 1 pcs

Hardware:

  • Prusa IR filamen sensor

Assembly instructions and fasterns for IFS the same as Vertex one.

To path through the z-axis calibration set the z-axis length in settings menu to 190mm same as for Bondtech IFS extruder/Vertex IFS extruder.

Tagi