Pantograph Bookend
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametric retractable bookend that was designed to actually work (doesn't flip).
- Ocena
- 0 / 5
- Polubienia
- 59
- Pobrania
- 130
- Wydruki
- 0
- Wyświetlenia
- 903
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Public Domain
The main purpose of a bookend is to hold the books, so I decided to design one that does it as well as possible.
The original idea is not mine (saw it somewhere on Aliexpress as a metal version a while ago). I've designed this in openscad and tried to make it fully customizable.
To print this, you need:
- left and right wall
- some # of bars (there's 10 bars stl for the bookend as in the picture)
- 2 spacers, 2 long pins and some short pins
- 17 pins stl is prebuilt for the bookend as in the picture
- you can use ordinary pins (which need to be glued) or threaded pins
Check bookend.scad for options to customize and generate your own stl files.
A library for threads is included in files (source link is inside .scad file).
To achieve better sturdiness I recommend to increase thickness from 2mm to 3-4mm.
For the best holding power, you need to glue the pins in the sliders after you set desired width.
I printed this with PLA 0.6mm nozzle 0.4 height (pins 0.3 height) in total of 4 hours on MINI.
No supports, all default settings in PrusaSlicer.