1 / 3
spray can holder - 55mm for 3DLac
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a spray can holder that fits perfectly with a 3DLac can.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 43
- Wydruki
- 1
- Wyświetlenia
- 291
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
This is a spray can holder that fits perfectly with a 3DLac can.
It can be screwed underneath a shelf or vertically. The mounting has a stop on one side.
The holder will be inserted into the mount and get secured with a pin.
- Print the holder with support that only touches the build plate.
- Print the mount without support
- Print the pin vertically to ensure that it becomes round.
- The model is designed for 0.2 layer height with 0.4 nozzle.
- The model is designed for 3.5mm wide screws
I used 3.5 x 20mm screws
* I've added the “mount-spacer” so that multiple mounts can be attached easily without measuring.