CABO Card box (Kartenbox)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a multicolor print of a card box for the card game CABO. No MMU2S needed
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 174
- Wydruki
- 0
- Wyświetlenia
- 896
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a multicolor print of a card box for the card game CABO.
The first 4 layers with a thickness of 0.2 mm are printed in different colors. The following layers are printed in black or another color.
You don't need Prusa MMU2S to print multiple colors on one layer, just follow these settings and you can change the filament manually:
Make sure you are in advanced mode or expert mode.
- Go to the 'Printer Settings>General' tab and increase the number of extruders to the number of colors you need, and set the corresponding colors of the "extruders"
- Go to the 'Printer Settings>Custom Gcode' tab, open the 'Tool Change Gcode' field and enter M600.
- Go to the "Print Settings>Multiple Extruders" tab and in the "Wipe Tower" section, uncheck the Enable Wipe Tower option.
-Assign the appropriate extruders or, colors to the parts and then slice
Source: https://forum.prusa3d.com/forum/prusaslicer/manual-multicolor/
Recommendation:
- Layer thickness: 0.2mm
- Nozzel: 0.4mm