1 / 4
War of the Ring (2nd ed) Expansions - Lords and Warriors common insert — zdjęcie 1
1 / 4

War of the Ring (2nd ed) Expansions - Lords and Warriors common insert

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

2,50 € – 3,06 € netto (bez VAT)

Dla pliku: Card holder_0.2mm_PLA_A350_2h49m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 2,78 € netto (środek widełek).

Masa podana przez autora
34 g
Czas druku podany przez autora
2,82 godz.
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

A simple set of inserts to be able to store both expansions in one box.

Ocena
5 / 5
Polubienia
21
Pobrania
103
Wydruki
1
Wyświetlenia
1487
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Board Games
Licencja
GNU General Public License v2.0

This is a follow up of my previous model for War of the Ring (2nd ed) fast setup insert.

With this insert you can store both the Lords of Middle Earth and Warriors of Middle Earth expansions in the Warriors expansion box.

It is composed of:

  • Two card holders for the cards (sleeved)
  • One tray for the Warriors of Middle Earth expansion. For the figurines of the Free People, I divided in two slots as the Eagles are too wide to fit if I make three slots (as I have for The Shadow). So put the Ents with the Dead Men of Dunharrow and everything will fit. Make sure that all figurines are flat or else the factions cards that come on top won't fit
  • One tray for the Lords of Middle Earth that holds the figurines, the dice (from both expansions) and the tokens.

For the sleeves, I have used Gamegenic Tarot Prime Board game sleeves 73x122mm.

Tagi