Camera mount for Fokoos Odin-5
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A camera mount for the Fokoos Odin-5 that mounts to the X-Axis stepper motor mount.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 212
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
The X-axis stepper motor mount on the Fokoos Odin-5 has a couple of 3mm holes that work great for attaching a camera mount to the printer. I found it easiest to have the screws inside the mount with the nuts against the camera mount (see the photos). Not as nice looking as the other way around but far easier to get the mount installed. It's doable with the screw heads on the outside but patience is required to get those nuts threaded on when they're inside the mount.
The camera bracket is 7mm thick so it should be easy to find a suitable 1/4x20 thread screw or nut. I used a screw from an old camera tripod.
Prints fine without supports. The STEP file is included if you need to adjust where the bracket sits against the mount to better fit your webcam.