V-Strom 650 2017- Fusebox lids
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Useful if you want to modify it in some way.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 151
- Wydruki
- 1
- Wyświetlenia
- 1171
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Some fusebox lids for the V-Strom 650 2017+. Useful if you want to modify it in some way. The taller lid has extra room inside for an add-a-circuit tap or other modifications.
The spare fuse holders are deliberately loose, to enable simpler printing. Use a piece of tape (duct tape!) across the top, to keep them in situ.
The standard lid is designed to replace the standard OEM lid.
The tall lid is taller, so you can put an add-a-circuit in under it
The tall lid with hole has a slot cut out in it, for aforementioned add-a-circuit wiring and ease of putting the lid back on. This version has slightly bigger spare fuse holders so you will definitely need some method of restraint to keep them in.
If your printer prints the text well, then you can forego putting the OEM label back on. Mine was sticky enough to do so.
Print in PETG for best sturdiness and results. PLA will soften under higher temperatures.