Prusa MK4 17mm LED channel light bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracket for mounting 17mm aluminum LED channel to the Prusa MK4.
- Ocena
- 5 / 5
- Polubienia
- 42
- Pobrania
- 207
- Wydruki
- 6
- Wyświetlenia
- 2318
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Description
I tried the original and it was VERY close to working for the MK4 however the extruder sticks up a bit higher so I modified it to clear the nextruder on the MK4. While I was in there making edits I decided to add some nubs to better grab the sides of the 17mm aluminum LED channel as well as some zip tie through holes for better wire management options.
Printing Info
You can choose to print either the double variant for a light bar in the front and back or just the single variant for a front LED strip only. I printed mine in Prusament PLA on 0.3 draft preset with 0.4mm nozzle and its a great snap fit for both the printer mount as well as the LED channel