AOS5 V2 combined GPS/GoPro Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
GPS/GoPro Mount for front installation of GoPro and GPS
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 450
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted to be able to install a GoPro AND a GPS on my AOS5 V2 frame.
Since I don't like GPS mounts that extend out of the back of the quad, I designed this integrated GPS/GoPro mount for the front mounting patter (32 x 32 mm) of the AOS5 V2 frame.
GPS reception is great. 13 satellites indoors, see photo.
The design consists of 2 parts.
Part 1: GPS mount, print in PETG or PLA. I have installed the RUSHFPV GNSS Mini M10 GPS module (https://de.aliexpress.com/item/1005005300999477.html). Other 18 x 18 mm GPS should work as well.
Part 2: GoPro mount, print in TPU, 100 % infill.
I have glued together both parts using CA glue and activator spray for better robustness.
Both parts with the GoPro mount on top and the GPS mount on the bottom are screwed onto the AOS5 V2 top plate.
combined weight: 13 g, so it is also very lightweight.
I have attached the *.f3d file so you can adjust it for other GPS modules.