1 cm and 2cm circle cube
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A quick Print to use for calibration or figure out ratios between expected and output. It SHOULD be exactly 1CM.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 81
- Wydruki
- 0
- Wyświetlenia
- 635
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution
A quick Print to use for calibration or figure out ratios between expected and output.
It SHOULD be exactly 1CM. On my printer, it came out at 9.88x10.00x10.11
A second cube is 2CM.
X and Y axis are on the side of the cube that corresponds to the axis being printed. (ie X on side to side, Y on back to front)
I also included FreeCad designs I used to make it.
To calibrate your x and y axis do the following:
(distance expected / distance printed) * current steps value = NEW steps per mm value.
get the steps per mm value with the command
M503
which returned
echo:Steps per unit:
echo: M92 X100.00 Y100.00 Z400.00 E280.00
...
So my case, 10/9.88 * 100.00 = 101.214574899
So To set the new value
M92 X101.214574899
Print instructions
Category: 3D Printing Tests Summary
A quick Print to use for calibration or figure out ratios between expected and output.
It SHOULD be exactly 1CM. On my printer, it came out at 9.88x10.00x10.11
A second cube is 2CM.
X and Y axis are on the side of the cube that corresponds to the axis being printed. (ie X on side to side, Y on back to front)
I also included FreeCad designs I used to make it.