Square-2 rubiks cube

list of parts:

• 8x edge, corner1, corner2
• 2x center, core1, core2, antipop, side caps, side caps with screw and nut cover, caps top bottom
• 1x m3 screw, m3 nut, pen spring, washer (3dprinted washer works well too - it just holds the spring)
• and superglue :D

Alomost all the parts are support free, except core2 and center. For these parts supports only touching bed are enough. Cube should work even without sanding, but I highly recommend sanding all the parts, where the parts are moving. It will improve cornercutting performance and lowers the chance of popping.

 Glueing:

• Super glue core1 and core2, after it dries glue centerpiece onto it. Everything must be aligned, if it is not, you will experience some locking and more sanding will be required.
• Both sides are assembled the same.
• After that, there is nothing else to glue except for the caps but for them you can use hotglue, because there is no strengt required.

Assembly:

• If you know what this puzzle is, I predict you know how this puzzle works and assembly should not be a problem. But you can search square-1 assembly tutorial on youtube, the steps are the same.

I also highly recommend using some lube, it will turn much smoother and there will not be that much locking.