Head Light Honda PF50 Amigo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a reproduction of the head light of the 70's moped Honda Amigo 50.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 197
- Wydruki
- 1
- Wyświetlenia
- 1338
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
I was restoring a honda amigo from 1972 and the headlight was completely broken, so, 3D printing to the rescue, I modeled this headlight casing.
It works really well, the speedometer, light switch, lens and all other gear fits perfectly and it mounts without trouble on the moped. It is not a 100% accurate recreation of the original, but really close.
I printed it in PLA, 3 walls, 15% infill, with the lens opening on the build plate. I used tree supports to be able to remove them, normal supports will fill the entire body of the part and be reaaly difficult to remove/