1 / 5
Modular 2U 19" Rack Panel
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rack Components for the DAP 2U modular 10x segment MP-1, RasPi cluster, fan shroud
- Ocena
- 5 / 5
- Polubienia
- 100
- Pobrania
- 211
- Wydruki
- 4
- Wyświetlenia
- 3796
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 4) (Komentarze: 15)Remiksy (1)Kolekcje (193)Powiązane
These models were mainly designed for creating a proper Raspberry Pi 4 cluster rack mount kit. However, things tend to escalate here a bit, so I created a whole new ecosystem for your 19" rack, based on the amazing DAP 2U MP-1 panel.
- Raspberry Pi 4 mount: I used a PoE hat as I didn't want to deal with additional cables. It also reduces the height as of no USB plug. Including 3x 3mm holes for optional LEDs.
- 80mm fan mount: mount an 80mm fan with the appropriate hexagon-styled shroud.
- Cable duct: Here and there, you just need a cable. The cables could be inserted from the side, if you bend the cable duct a little. Especially good for large power plugs.
- Fan controller: Basic module for e.g. ESP8266 with temperature sensor and 5V level shifter for controlling PWM fans. Especially good with ESPhome and a 1.3" OLED display!
- Empty cover: prevent unwanted airflow here and there
- And many more. Drop your ideas in the comments…
Printing instructions: go with 100% infill and preferably PETG.
I'm using a THON double door 19" stage rack from Thomann with all my IT stuff in it. really quiet also in the home office.