1 / 3
Chevy Bolt EV/EUV 2022-2023 Magsafe iPhone Mount for Keyfob Holder — zdjęcie 1
1 / 3

Chevy Bolt EV/EUV 2022-2023 Magsafe iPhone Mount for Keyfob Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A dual swivel magsafe phone mount that fits in the useless keyfob slot of the Chevy Bolt EV/EUV 2022-2023.

Ocena
5 / 5
Polubienia
19
Pobrania
146
Wydruki
1
Wyświetlenia
1901
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

Requires 2x M3 10-12mm screws and 2x M3 hex nuts.

Recommend to print parts in PETG, ABS, etc. so they don't melt in your car.

Print Knuckle with supports, see screenshot for recommended print orientation.

Glue Socket to back of Magsafe with the slot perpendicular to the notch at the top of the magsafe holder.  (Alternatively these parts could be combined and then printed with supports.)

The base should snap very snugly into the keyfob slot and hold well enough to not come out when you lift up your phone. If it doesn't fit snugly you may need to slightly adjust your print parameters like your extrusion multiplier or even a slight scale adjustment on the base part.

 

Tagi