1 / 4
Ender EZ Belt Sheet Metal Heat Bed Upgrade — zdjęcie 1
1 / 4

Ender EZ Belt Sheet Metal Heat Bed Upgrade

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Upgrade your Ender EZ Belt printed heat bed mounting components to super stiff, high-temperature sheet metal!

Ocena
0 / 5
Polubienia
4
Pobrania
24
Wydruki
0
Wyświetlenia
361
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

The Ender EZ Belt uses 3D printed parts mounted directly to the heat bed to transform an Ender 3 into a conveyor belt 3D printer, while preserving as much build volume as possible.

Or at least, the original design did. Now, you can replace those printed parts with 3mm thick steel parts instead.

This simple upgrade takes your build to a whole new level:

  • Increase stiffness & reliability
  • No deflection from the spring load
  • High temperature resistance for ABS and other high temperature materials

You will need some additional hardware to install these parts:

  • M3x5 screw - 8 pieces - These attach to the heat bed extenders to help locate them on the corner of the heat bed.
  • M5 washer - 4 pieces - These sit in between the bolt heat and the heat bed mount.
  • Leveling screw cap - 4 pieces - These are 3D printed, and sit in between the leveling screw and the heat bed extender.

Tagi