1 / 5
Low Profile Housing for Genasun GV-5 MPPT Charger — zdjęcie 1
1 / 5

Low Profile Housing for Genasun GV-5 MPPT Charger

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I needed a lower profile holder for my Genasun GV-5, so I came up with this flat housing that allows connection the…

Ocena
0 / 5
Polubienia
0
Pobrania
13
Wydruki
0
Wyświetlenia
146
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I needed a lower profile holder for my Genasun GV-5, so I came up with this flat housing that allows connection the inputs/outputs with Anderson Powerpoles.

The part number for the 6-32 threaded insert is 93365A132 from McMaster Carr.

I should have taken a picture before blobbing on all that epoxy to seal the lid and connectors, but you can still see how they fit in. There is no depth detent to restrict the powerpoles, so you can position them how you like. The pictures show the housing printed in carbon fiber filled PLA.

Category: Electronics

Tagi