Lack table leg extensions
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
121mm leg extensions for the original Lack table including a leg with cable indents.
- Ocena
- 4,667 / 5
- Polubienia
- 66
- Pobrania
- 343
- Wydruki
- 2
- Wyświetlenia
- 2667
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
121mm leg extensions for the original Lack table including a leg with cable indents.
I have placed my Prusa inside the Lack table cabinet on top of a 5cm high 15kg tile which absorbs vibrations. As I have had some issues with the extruder motor getting hot, i have also printed a cooler for the extruder motor which takes up some space on the Z-axis.
When I have to print models bigger than 16-17 cm on the Z-axis I need to raise the lack table so I extended the original lack table corner parts.
Use cyanoacrylate based glue to glue the two parts together.
Print instructions
Category: 3D Printer Accessories Summary
121mm leg extensions for the original Lack table including a leg with cable indents.
I have placed my Prusa inside the Lack table cabinet on top of a 5cm high 15kg tile which absorbs vibrations. As I have had some issues with the extruder motor getting hot, i have also printed a cooler for the extruder motor which takes up some space on the Z-axis.
When I have to print models bigger than 16-17 cm on the Z-axis I need to raise the lack table so I extended the original lack table corner parts.
Use cyanoacrylate based glue to glue the two parts together.
Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: No
Resolution: 0.20
Infill: 15%
Filament: FilamentPM PLA