Samsung S10 Bike Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Update: As the Fusion 360 team has decided to remove export to all other formats than STL, then I have included the…
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 152
- Wydruki
- 0
- Wyświetlenia
- 952
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
Update: As the Fusion 360 team has decided to remove export to all other formats than STL, then I have included the design in .f3d and .step format. Good luck.
I needed a phone mount for my Radon Mountainbike so I decided to build it from scratch as a Fusion 360 training task.
The pictures shows the first prototype printed in 0.30.
The mount fits a Samsung S10 with TPU case perfectly.
The attachment radius is 35mm.
Top/bottom layer: 3
The clearance from the attachment to the mount is 10 mm.
The screw size on the three screws on the phone mount part must not be longer than M3 13mm. The other M3 screws can be longer.
Use support enforcers for the middle part of the attachment parts as shown in the picture (Prusaslicer).
Print instructions
Category: Sport & Outdoors Summary
Update: As the Fusion 360 team has decided to remove export to all other formats than STL, then I have included the design in .f3d and .step format. Good luck.
I needed a phone mount for my Radon Mountainbike so I decided to build it from scratch as a Fusion 360 training task.
The pictures shows the first prototype printed in 0.30.
The mount fits a Samsung S10 with TPU case perfectly.
The attachment radius is 35mm.
Top/bottom layer: 3
The clearance from the attachment to the mount is 10 mm.
The screw size on the three screws on the phone mount part must not be longer than M3 13mm. The other M3 screws can be longer.
Use support enforcers for the middle part of the attachment parts as shown in the picture (Prusaslicer).
Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: Yes
Resolution: 0.15
Infill: 10
Filament: Fiberlogy PETG
Notes:
The mount can be printed in PLA as well but if it's mounted permanently on the bike you might want to print it in PETG. I have only printed it in PETG so far.