Part fan duct for Cocoon Create Touch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a duct to be used on the Cocoon Create Touch with the mounting bracket from Gascat's High Performance cooling…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 241
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is a duct to be used on the Cocoon Create Touch with the mounting bracket from Gascat's High Performance cooling assembly: https://www.thingiverse.com/thing:2084339
The original duct couldn't quite reach the heating block on the CT so I made this design. It's also inspired by notanumber's cooling duct https://www.thingiverse.com/thing:2023906. That was my cooling setup for a long time until I decided that I'll be hooking up a BLTouch at the front of the extruder assembly, where the old fan used to sit.
Print Settings
Printer:
Cocoon Create Touch
Rafts:
No
Supports:
No
Resolution:
.3
Filament:
3d Fillies PLA
Notes:
Base printed with 20% infill, the rest of the nozzle printed in vase mode to keep it as light as possible
Category: 3D Printer Accessories