Car Coolant Funnel Adapter Bleeder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an adapter for refilling coolant in a car and afterwards bleed the coolant system for cars that are using the…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 161
- Wydruki
- 0
- Wyświetlenia
- 1295
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This is an adapter for refilling coolant in a car and afterwards bleed the coolant system for cars that are using the classic coolant cap design.
Basic instructions:
Using the parts:
-Close the passage to the overflow tank using the Plug
-Place the adapter on the radiator opening
-Put an bottle that was opened on the bottom side onto the adapter - the neck needs to have an diameter of 2.5cm
... follow the instructions from one of the many youtube videos.
Use at you own risk, follow the cars manual instructions for coolant refill.
The parts should be printed in ABS and the main adapter should have supports (will print in lesser quality without).
Print Settings
Printer Brand:
Anet
Printer:
A8
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
25
Filament: NoName ABS
Category: Automotive