1 / 3
Toyota MR2 (SW20) Extended Kick Panel Fuse Cover
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extended cover for the kick-panel fuse cover found in a 2nd gen Toyota MR2 (SW20) to allow for the height of a fuse tap.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 58
- Wydruki
- 1
- Wyświetlenia
- 654
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This is an extended kick panel fuse cover for a '91-'99 Toyota MR2. This cover provides enough space to use a fuse tap on one of the kick panel fuses. I did this for wiring my AiM digital dash and tapping into the 12V power via the original 7.5A "Gauge" fuse.
I was able to carefully peel the sticker off of the original cover and reapply it to the new one.
Recommended to print in PETG or ASA/ABS for best durability and strength of the snap hooks.
