Simple webcam holder for mounting on X axis motor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted a simple holder that would move my webcam up and down with Z axis.
- Ocena
- 4 / 5
- Polubienia
- 6
- Pobrania
- 131
- Wydruki
- 1
- Wyświetlenia
- 1526
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I wanted a simple holder that would move my webcam up and down with Z axis. I couldn't find one that I liked so I decided to model my own. I used Solidworks 2019 student / maker edition and this came out. I used 3 zip-ties to hold the webcam down (2 for camera, 1 for cable) and it works quite nicely.
I used 1 screw (M3 x 18) from the spare bag to fix it on X-axis motor.
I printed it with PLA that was shipped with printer, model did bend a bit but IMHO nothing tragic. First model that I made and printed so I'll learn how to do it better next time :)
If anyone needs the original .sldprt file, I can happily provide it.
I'm using a Trust (article #18163)
Zyno Full HD Video Webcam (if anyone wanted to know)
(last photo is a sample what I can see when I'm away from home now)
Print instructions
I printed the model with my "logo" facing down. First layer was 0,2 mm, others were 0,15 mm. I used PLA that came with printer (grey one). After printing I removed support with pliers, what was still stuck inside the hole, I got out with hex key (that was included in box with printer).