Ikea Lack table stack leg connector and brace
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A three-part connector to lock legs on upper-level to the lower lack table-top
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 129
- Wydruki
- 4
- Wyświetlenia
- 1104
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed to strengthen an Ikea Lack table supporting my printer. I connected the table to another Lack table top as a base, but it would work just as well as a double-decker.
I wasn't happy with the many many options available. I wanted something that braced the inside of the leg and the outside of the table top, while being screwed into place. I also wanted something printable without supports and with a very nice outer surface finish. I also wanted hidden screws. This is my solution.
A hidden pin locks the upper and lower parts together and serves as a locating pin that the leg fits onto. A hidden screw hole locks everything in place.