Drill guide for pipes and corners
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This drilling guide helps to drill or tap pipes, poles and corners perpendicularly with its 90 degree groove on the…
- Ocena
- 4,857 / 5
- Polubienia
- 60
- Pobrania
- 274
- Wydruki
- 7
- Wyświetlenia
- 1048
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This drilling guide helps to drill or tap pipes, poles and corners perpendicularly with its 90 degree groove on the bottom.
Useful especially for piloting holes when drilled on smaller pipes.
Only needs to be clamped to the drilled workpiece.
For demonstration I drilled a piece of pipe and a corner of my table.
Hole sizes in mm 12, 10, 8, 6, 4, 5, 3, printer into the piece.
! Printer settings must be accurate for the drill sizes to match !
Print Settings
Supports:
No
Resolution:
0,2
Infill:
20% or more
Filament:
Giantarm Any hard plastic
Notes:
I found best results when printed number face towards the plate.
PLA used in the first sample (in pictures) which does not last very many drillings. The harder the plastic, the longer the lifetime.
! Printer settings must be accurate for the drill sizes to match !
Category: Machine Tools