RockShox Reba lockout from crown instead of remote lockout
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple model for lockout on crown of RS Reba fork with Motion Control damper used.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 481
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Public Domain
INSTALATION:
“reba_cover_body.3mf” should be printed “snug fit”, it needs to be pressed on 24mm hex screw firmly and it needs to be a little bit tilted(1mm is enough) to make crown work(crown need to hold a spring in a motion control damper).
Once a body is installed, head should be added and tested every revolution of mounting screw if it is binding or not.
Ideal case is when head is not binding on half way, then at the end head needs to be stuck.
Also add a little bit of grease between head and body.
I recomend to print it from PETG, PC or ABS.