Monitor Mounted Mouse Cable Management
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This tiny model is designed to be affixed to a monitor or elevated object in order to route your mouse cable off your…
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 101
- Wydruki
- 1
- Wyświetlenia
- 733
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
This tiny model is designed to be affixed to a monitor or elevated object in order to route your mouse cable off your desk. I used a small piece of 3M double sided foam tape, but almost any adhesive will work.
The flat side that accepts the tape is 10mm by 10mm (0.4in by 0.4in). The inner hole has a diameter of 6mm (0.24in). The opening at the top is 3mm (0.12in) wide. I included STEP files in case anyone wanted to modify this. If not, just scale the model in your slicer of choice.
Print instructions
Print at 0.15 (4mm nozzle) layer height for optimal strength. Print in the orientation it imports to in your slicer (same orientation as in the cover picture). Any infill % you want (all of it is in the base that connects to the monitor).