P1P, X1, X1C 90 Degree X and Y Axis Holder / Jig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model hold the X and Y axis at 90 degrees while you tighten the belts
- Ocena
- 4,867 / 5
- Polubienia
- 248
- Pobrania
- 1028
- Wydruki
- 18
- Wyświetlenia
- 6374
- Oceny
- 15
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I read somewhere that people have had success with removing ghosting/belt lines by positioning the X and Y gantry at 90 degrees during the belt tensioning process. I decided to make a quick model to help hold the gantry in position during this process. This also holds the tool head in the center of the X while tightening.
My printer wasn't having issues so its hard for me to say if this helped or not. Please leave a comment if it did, or did not help you!
As always, print and use at your own risk. The jig should slide on to the X/Y rails easily. If they dont, do not force it.
