1 / 2
Lampshade Vase Mode
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This lampshade (120mm X 210mm) and finial are for a standard table lamp that can house a large LED style filament bulb.
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 113
- Wydruki
- 1
- Wyświetlenia
- 1053
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (44)Powiązane
This lampshade is roughly 120mm wide (the width of the square cross-section) by 210 tall, and uses the vase mode in PrusaSlicer, at 0.3mm layer height setting. So the wall thickness is only 0.6mm, but is sufficiently robust for the application and has a very cool look in clear PETG. I imagine that white PETG (or other colors) would also look very good.


Also included is the finial with ¼"-27 threads, and it screws right on and holds the shade securely:

