MLOK Sling loop
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
MLOK standard sling loop for paracord, mashhooks, or HK style snap hooks
- Ocena
- 5 / 5
- Polubienia
- 67
- Pobrania
- 486
- Wydruki
- 2
- Wyświetlenia
- 1756
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
MLOK standard attachment. A strong, minimalist loop for a mashhook, HK snaphook, or a loop of paracord for sling attachment.
Fitment was tested on a ‘real steel’ handguard. The hardware I used for testing and fitment was taken from a QD socket I had laying around. As with anything hardware, bolt head dimensions may vary depending on vendor.
PLA+ should be plenty strong for this. Nylon or PETG would probably be ok as well, but I have not tested those two materials.
See slicer screen shot for support and orientation - It's kind of important to orient this standing like pictured, this way the loop sections layer lines are solid loops to prevent pulling it apart at one of the layers.