Low Poly Bulbasaur Planter with Mario Pipe Pot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Low Poly Bulbasaur Planter remixed to add a built in pot and increase soil capacity.
- Ocena
- 5 / 5
- Polubienia
- 70
- Pobrania
- 322
- Wydruki
- 3
- Wyświetlenia
- 1651
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to add a pot to Hitsman's Low Poly Bulbasaur Planter because it's designed to hold a separate pot, and it doesn't hold much soil on its own. I ended up making it look like a Mario pipe, extending the pot down to the floor for more capacity, increasing the number of drain holes to 7, adding a taper to them to prevent clogging, and adding internal splines to discourage unhealthy root circling. Some extra variants from along the way are included as well.
Printing: This model has a lot of empty space. For most efficient printing, use Lightning infill with 2-3 perimeters. It is possible to print it without any infill but the one spot where that can be problematic is the forehead. I have included a test print of just the forehead so that you can dial in your infill and perimeter settings, to avoid having the print fail right at the end.
Update Feb 7 2024: Fixed the thick rim STL.