1 / 3
ASRock Industrial NUC 1100 Series - 10 Inch Rackmount — zdjęcie 1
1 / 3

ASRock Industrial NUC 1100 Series - 10 Inch Rackmount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

10" Rackmount Kit (1.5U) for ASRock NUCBOX 1100 Generation Industrial NUC

Ocena
0 / 5
Polubienia
7
Pobrania
71
Wydruki
1
Wyświetlenia
1067
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial

ASRock Industrial NUC 1100 Series Rackmount Kit for 10" server cabinets. The NUC is attached to the cage using two VESA mounting screws on the bottom. Alternatively, it can be fixed with a velcro strap.

The front plate has 5 connectors, in which a keystone adapter can be installed. This allows easy access to connectors from the front. Search for “keystone coupler” to find various options.

There is no Power Button accessible from the front. Instead of a 6th keystone adapter, you can install a Power Button by buying the following components:

  • 16mm Power Button with Mainboard Header
  • Pin header female 2.00 mm 10 pin > pin header male 2.54 mm 10 pin

With the special 1.5U design, you can install two NUCs in 3U without a gap. The mounting screws will perfectly align with the rail, despite being in half position.

This is a two-piece print that is glued together using a rigid triangle-shaped connector. The two-piece design allows for printing without any supports and you are going to have a nice-looking front (with the Prusa Textured PEI Powder-coated Sheet).

To fit the front on the Prusa bed, rotate it by 54°.

I recommend printing in PETG because the weight and heat might deform PLA over time. You might also want to increase the bed temperature if you have problems with the edges lifting up (The edges of the print bed are usually about 5-10°C cooler).

Tagi