1 / 16
Traxxas Slash 2WD LCG Sway Bar Mount For Rear End Anti Roll Bar Hot Racing TE311SLC — zdjęcie 1
1 / 16

Traxxas Slash 2WD LCG Sway Bar Mount For Rear End Anti Roll Bar Hot Racing TE311SLC

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

As the the mounting points of the rear sway bar are not good enough (IMHO) I designed a holder which seem to function…

Ocena
0 / 5
Polubienia
15
Pobrania
59
Wydruki
0
Wyświetlenia
1028
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

As the the mounting points of the rear sway bar are not good enough (IMHO) I designed a holder which seem to function perfect and is easy to install and print.

I used M3x16 screws to mount the holder and the shock tower to the body. For the sway bar mount you can use the screws which are in the set from hot racing.

I have to mention that I cut off the bended ends of the rear sway bar for better fitting of the push rods.

Leave a comment if you have any questions.

Print Settings

Printer:

Cetus 3D MK1

Rafts:

Doesn't Matter

Supports:

No

Resolution:

0.2 mm

Infill:

at leat 80% or more

Filament:

DasFilament PLA

Black

Category: R/C Vehicles

Tagi